Care / Washing Instructions for Reflexite VC104

Manual Washing

Reflexite VC104 can be washed manually by brush, cloth or sponge using water, soap or detergent followed by a clean water rinse.

Power Washing

Automatic truck / car wash or standard high-pressure hand spray:

Maximum pressure – 1200 PSI / 80 bar

Maximum water / wash solution 60 degrees C

40 degrees C, Nozzle cone opening sixe should be used

Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking surface

Hold the cleaning jet a mimum of 60cm away from the material.

When using cleaners, follow manufacturer’s recommendations for diultion. Thoroughly rinse after soaking vehicle.