menu

Posts in VC312

Application of Reflexite VC104 Curtain Grade Heat Activatable (HA) Version

Written On By Katie
Application of Reflexite VC104 Curtain Grade Heat Activatable (HA) Version

Reflexite VC104 Curtain grade HA can be applied to trucks and trailers with new curtains. Tools required Clean cloths Craft knife Squeegee covered with a clean cloth to avoid scratching the material Cleaner – Isopropyl alcohol Hot air gun Travelling rig or high frequency welding equipment Application Temperature To ensure proper adhesion between the tape […]

CONTINUE READING
Written in VC312

Full Battenburg livery Kit

Written On By Katie
Full Battenburg livery Kit

Font Livery The word POLICE shall be posistioned back to front on the bonnet of the vehicle using Reflexite VC312 Daybright Blue. The front pillar of the cab will be highlighted using Reflexite VC312 Daybright Silver/White. The Daybright material should be cut leaving a 6mm gap from the edges of the pillar. Side livery The […]

CONTINUE READING
Written in VC312

Half Battenburg Livery Kit

Written On By Katie
Half Battenburg Livery Kit

Front Livery The word POLICE shall be positioned back to front on the bonnet of the vehcle using Reflexite VC312 Daybright Blue. The front pillar of the cab will be highlighted using Reflexite VC312 Daybright Silver/White. The daybright material should be cut leaving a 6mm gap from the edges of the pillar. Side Livery The […]

CONTINUE READING
Written in VC312

Warranty: Reflexite VC312

Written On By Katie
Warranty: Reflexite VC312

Reflexite warrants for a period of seven years from the date of invoice that the product will be free from defects in material and workmanship and will remain effective for its intended use as described below; provided, however, that this warranty will not apply to any product which has been abused or misused or where […]

CONTINUE READING
Written in VC312

Application of Reflexite VC104 Rigid Grade

Written On By Katie
Application of Reflexite VC104 Rigid Grade

Reflexite VC104 Rigid Grade can be applied to new and used trucks and trailers with painted rigid sides. For unpainted surfaces e.g. stainless steel please contact us. Tools Required Clean cloths Craft knife Squeegee covered with a clean cloth to avoid scratching the material Old vehicles only : Abrasive pad Solvent Cleaner : Isopropyl alcohol […]

CONTINUE READING
Written in VC312
Top